Your basket is empty.

Added to Basket

Rebound Brushable Silicone Trial Kit


Product Coderbstk
ManufacturerSmooth On

One (1) Smooth-On Rebound Brushable Silicone Trial Kit

Rebound® 25 - 25 ShoreA         Rebound® 40 - 40 ShoreA

Potlife 20 min - Demold 6hrs


  •     Soft and Flexable (great for making molds with deep undercuts)
  •     Easy to mix 1:1 Ratio by Volume
  •     Apply to vertical surfaces without sagging.

Rebound® silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.

Have you been using a Urethane Rubber to make Brush On Molds?  If so check out these advantages of using the Rebound® Silicone over the Urethane

  1.     Minimal surface preparation (Rebound won't stick to most surfaces)
  2.     Easy to mix two part together (self thickens)
  3.     More flexible
  4.     Longer library life

3 to 4 layers are all that is necessary to make a strong, durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.) And because Rebound® is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.