Your basket is empty.

Added to Basket

Crystal Clear Series: Trial Kit

$88.95

Specification
Product Code ccstk
Manufacturer Smooth On
Condition New
Weight 1.00000Kg

One (1) Smooth On Crystal Clear Series Trial Kit.

Crystal Clear® Series resins are water white clear and made specifically for applications that require absolute clarity. These rigid urethane casting resins differ only in working and demold times. Low viscosity ensures easy mixing and pouring. Crystal Clear® products cure at room temperature with negligible shrinkage. Cured castings are UV Resistant and are not brittle. Vibrant colors and color effects are achieved by adding SO-Strong® color tints. Applications include encapsulation, making prototype models, lenses, sculpture reproductions, decorative cast pieces, jewellery, prototype models, special effects and props. Heat curing is essential to realize full physical properties. Read the Technical Bulletin for full details.

  • Crystal Clear® 200 - 16 hour cure time - for ½" - 3" thick castings - 80 Shore D
  • Crystal Clear® 202 - 90 min. cure time - for 1/16" - ½" thick castings - 80 Shore D
  • Crystal Clear® 204 - 48 hour cure time - for 3" - 6" thick castings - 80 Shore D
  • Crystal Clear® 206 - 7 Days cure time - for castings greater than 6"  - 80 Shore D

Crystal Clear® 220 & 221 are water white clear resins made specifically for applications that require absolute clarity. These are “heat cure” systems and are harder versions of our popular Crystal Clear® Series resins (Shore 85D).

  •     Crystal Clear® 220 - overnight followed by post cure - pot life 22 mins - 85D
  •     Crystal Clear® 221 - overnight followed by post cure - pot life 75 mins - 85D

Room Temperature Cure (Crystal Clear® 220 & 221)- Followed By Post Cure - Allow material to cure overnight at room temperature (73°F / 23° C). Place entire mold structure in an oven and cure at 150°F / 60°C for 4 hours, followed by 4 hours at 212°F / 100°C. Allow casting or part to cool to room temperature before demolding.

Heat Curing (Crystal Clear® 220 & 221) - After pouring material into pre-heated mold, heat cure for four hours at 212°F / 100°C. Allow casting or part to cool to room temperature before demolding.

CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY - Proper ventilation, a NIOSH Approved Respirator and Protective Clothing are required to minimize the risk of inhalation and dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read MSDS before using.